NEUTRAL SILICONE OLIVE C-22

Diversity is only limited by imagination

logo2 logo1

MATERIALS:

One-component high quality silicone sealant with a low elasticity, naturally cured, supplied in cartouches or plastic packaging
White/colorless color
Adheres well to many building materials without primer, except: Teflon, polyethylene and polypropylene surfaces
Characterize by high resistance to UV radiation, weather conditions and aging.

INSTALLATION:

The surface on which the application is made must be free of dust, dirt and oil
Non-porous surfaces such as aluminum or glass should be cleaned with a suitable solvent
Porous surfaces, such as concrete or brick, should be mechanically cleaned
It is recommended to use primer for better grip. An adhesion test is recommended each time
After surface preparation, the silicone is applied using a suitable injection gun. The joints should be processed and smoothed before forming the epidermis
For the deep gaps, the possibility of moving the silicone should be considered
The silicone can’t be painted
Uncured silicone can be removed with solvents such as isopropyl alcohol or mineral spirits
Detailed information on storage, transport and safety are available in the safety data sheet (SDS).

Properties	Unit	Value
Tack free time	minute	5-10
Curing time	mm/24h	about 3
Dead weight	g/ml	about 1
Resistance to flow (ISO 7390 )	mm	about 0
Application temperature	°C	from +5 to +40
Working temperature	°C	from -40 to +150
Hardness (Shore A) (ISO 868 )	-	about 18
TENSILE STRENGTH:
Joint 12x12x50 mm – ISO 8339
Modulus of elasticity at 100% elongation (ISO 8339 )	Mpa	about 0,35
Tensile strength (ISO 8339 )	Mpa	about 1,30
Elongation at break (ISO 8339 )	%	>550
The following values were obtained at temperature +23°C and 50% relative humidity, unless stated otherwise.