Diversity is only limited by imagination
M12 5,5x35 without washer
Self-drilling screws for fixing steel sheets to the steel substrate
Materials:
- Screws are made of low carbon steel surface-hardened and galvanized to 12 microns
- Screw heads may be coated with lacquer coating
Installation:
- Maximum drilling capacity in steel up to 12 mm
- For installation, use cappers with a maximum speed of 1800 rpm with regulated torque
- Screws for corrosivity class C2
- Screws in class A1 – reaction to fire
Technical Approvals And Assessments:
- AT-15-9188/2015
- ETA-16/0739
| Product code | EAN code | DxL | Color | hmin | hmax | Max. drilling capacity | Head size | Washer diameter | Single box | Outer cartoon |
| mm | - | mm | mm | mm | mm | mm | pcs. | pcs. | ||
| BF125535 | 5901845901499 | 5,5x35 | zinc | 4,00 + 0,50 | 17 | 12 | 8 | 14 | 500 | 6000 |
MAXIMUM AND MINIMUM THICKNESS OF FIXED ELEMENTS:
- h min – minimum thickness of the fixed elements. Is the sum of: the minimum thickness of the substrate and the minimum thickness of the steel sheet tested with specific screw type
- h max – maximum thickness of the fixed elements. Is the sum of: the thickness of the substrate, the thickness of the steel sheet and the thickness of components located between the substrate and steel sheet or the thickness of the air gap
| Fastener designation | Steel sheet thickness2), [mm] | Characteristic share load, [kN]* | |||||||
| Steel substrate thickness 1), [mm] | |||||||||
| 4,00 | 5,00 | 6,00 | 8,00 | 10,00 | 12,00 | 14,00 | 16,00 | ||
| M12 5,5x35 | 0,50 | 1,66 | 1,66 | 1,66 | 1,66 | 1,66 | ― | ― | ― |
| 0,55 | 1,66 | 1,66 | 1,66 | 1,66 | 1,66 | ― | ― | ― | |
| 0,63 | 1,76 | 1,76 | 1,76 | 1,76 | 1,76 | ― | ― | ― | |
| 0,75 | 2,60 | 2,60 | 2,60 | 2,60 | 2,60 | ― | ― | ― | |
| 0,88 | 2,60 | 2,60 | 2,60 | 2,60 | 2,60 | ― | ― | ― | |
| 1,00 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| 1,13 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| 1,25 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| 1,50 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| 1,75 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| 2,00 | 3,37 | 3,37 | 3,37 | 3,37 | 3,37 | ― | ― | ― | |
| * In order to determine the design resistance characteristic value should be divided by a safety factor of 1.33 | |||||||||
| 1) steel grade S235JR according to PN-EN 10025:2007 | |||||||||
| 2) steel grade S280GD, S320GD or S350GD according to PN-EN 10346:2011 | |||||||||
| Fastener designation | Steel sheet thickness2), [mm] | Characteristic tension load, [kN]* | |||||||
| Steel substrate thickness 1), [mm] | |||||||||
| 4,00 | 5,00 | 6,00 | 8,00 | 10,00 | 12,00 | 14,00 | 16,00 | ||
| M12 5,5x35 | 0,50 | 0,80 | 0,80 | 0,80 | 0,80 | 0,80 | ― | ― | ― |
| 0,55 | 0,80 | 0,80 | 0,80 | 0,80 | 0,80 | ― | ― | ― | |
| 0,63 | 1,00 | 1,00 | 1,00 | 1,00 | 1,00 | ― | ― | ― | |
| 0,75 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 0,88 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 1,00 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 1,13 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 1,25 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 1,50 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 1,75 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| 2,00 | 1,31 | 1,31 | 1,31 | 1,31 | 1,31 | ― | ― | ― | |
| * In order to determine the design resistance characteristic value should be divided by a safety factor of 1.33 | |||||||||
| 1) steel grade S235JR according to PN-EN 10025:2007 | |||||||||
| 2) steel grade S280GD, S320GD or S350GD according to PN-EN 10346:2011 | |||||||||
European Technical Assessment:
Declaration of Performance:
Product Card:
Operator Manual:
Do not forget about accessories!!!
Want to know more? Download our Catalog
bf_Baltic_Fasteners