Diversity is only limited by imagination
M3 4,8xL with washer V14
Self-drilling screws for fixing steel sheets to the steel substrate
Materials:
- Screws are made of low carbon steel surface-hardened and galvanized to 12 microns
- Washer is made of zinced carbon steel with vulcanized EPDM layer
- Screw heads and washers may be coated with lacquer coating
Installation:
- Maximum drilling capacity in steel up to 3 mm
- For installation, use cappers with a maximum speed of 2200 rpm with regulated torque
- Screws for corrosivity class C2
- Screws in class A1 – reaction to fire
Technical Approvals And Assessments:
- AT-15-9188/2015
- ETA-16/0739
| Product code | EAN code | DxL | Color | hmin | hmax | Max. drilling capacity | Head size | Washer diameter | Single box | Outer cartoon |
| mm | - | mm | mm | mm | mm | mm | pcs. | pcs. | ||
| BF3481614 | 5901845900430 | 4,8x16 | zinc | 1,00 + 0,50 | 2 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914 | 5901845900447 | 4,8x19 | zinc | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3482214 | 5901845900591 | 4,8x22 | zinc | 1,00 + 0,50 | 8 | 3 | 8 | 14 | 250 | 3000 |
| BF3482514 | 5901845900607 | 4,8x25 | zinc | 1,00 + 0,50 | 11 | 3 | 8 | 14 | 250 | 3000 |
| BF3483214 | 5901845900614 | 4,8x32 | zinc | 1,00 + 0,50 | 18 | 3 | 8 | 14 | 250 | 3000 |
| BF3483514 | 5901845900621 | 4,8x35 | zinc | 1,00 + 0,50 | 21 | 3 | 8 | 14 | 250 | 3000 |
| BF3485014 | 5901845900638 | 4,8x50 | zinc | 1,00 + 0,50 | 36 | 3 | 8 | 14 | 250 | 3000 |
| The basic range of RAL colors | ||||||||||
| BF3481914R3005 | 5901845900454 | 4,8x19 | RAL 3005 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R3009 | 5901845900461 | 4,8x19 | RAL 3009 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R3011 | 5901845900478 | 4,8x19 | RAL 3011 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R5010 | 5901845900485 | 4,8x19 | RAL 5010 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R6005 | 5901845900492 | 4,8x19 | RAL 6005 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R6020 | 5901845900508 | 4,8x19 | RAL 6020 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R7024 | 5901845900515 | 4,8x19 | RAL 7024 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R7035 | 5901845900522 | 4,8x19 | RAL 7035 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R8004 | 5901845900539 | 4,8x19 | RAL 8004 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R8017 | 5901845900546 | 4,8x19 | RAL 8017 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R8019 | 5901845900553 | 4,8x19 | RAL 8019 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R9002 | 5901845900560 | 4,8x19 | RAL 9002 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R9005 | 5901845904605 | 4,8x19 | RAL 9005 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R9006 | 5901845900577 | 4,8x19 | RAL 9006 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
| BF3481914R9010 | 5901845900584 | 4,8x19 | RAL 9010 | 1,00 + 0,50 | 5 | 3 | 8 | 14 | 250 | 3000 |
MAXIMUM AND MINIMUM THICKNESS OF FIXED ELEMENTS:
- h min – minimum thickness of the fixed elements. Is the sum of: the minimum thickness of the substrate and the minimum thickness of the steel sheet tested with specific screw type
- h max – maximum thickness of the fixed elements. Is the sum of: the thickness of the substrate, the thickness of the steel sheet and the thickness of components located between the substrate and steel sheet or the thickness of the air gap
| Fastener designation | Steel sheet thickness1), [mm] | Characteristic share load, [kN]* | |||||||
| Steel substrate thickness 1), [mm] | |||||||||
| 1,00 | 1,25 | 1,50 | 2,00 | 3,00 | 4,00 | 5,00 | 6,00 | ||
| M3 4,8xL | 0,50 | 1,17 | 1,17 | 1,17 | 1,17 | ― | ― | ― | ― |
| 0,55 | 1,17 | 1,17 | 1,17 | 1,17 | ― | ― | ― | ― | |
| 0,63 | 1,44 | 1,44 | 1,44 | 1,44 | ― | ― | ― | ― | |
| 0,75 | 2,27 | 2,27 | 2,27 | 2,27 | ― | ― | ― | ― | |
| 0,88 | 2,27 | 2,27 | 2,27 | 2,27 | ― | ― | ― | ― | |
| 1,00 | 2,64 | 2,64 | 2,64 | 2,64 | ― | ― | ― | ― | |
| 1,13 | 2,64 | 2,64 | 2,64 | ― | ― | ― | ― | ― | |
| 1,25 | 2,64 | 2,64 | 2,64 | ― | ― | ― | ― | ― | |
| 1,50 | 2,64 | 2,64 | 2,64 | ― | ― | ― | ― | ― | |
| 1,75 | 2,64 | 2,64 | ― | ― | ― | ― | ― | ― | |
| 2,00 | 2,64 | ― | ― | ― | ― | ― | ― | ― | |
| * In order to determine the design resistance characteristic value should be divided by a safety factor of 1.33 | |||||||||
| 1) steel grade S280GD, S320GD or S350GD according to PN-EN 10346:2011 | |||||||||
| Fastener designation | Steel sheet thickness1), [mm] | Characteristic tension load, [kN]* | |||||||
| Steel substrate thickness 1), [mm] | |||||||||
| 1,00 | 1,25 | 1,50 | 2,00 | 3,00 | 4,00 | 5,00 | 6,00 | ||
| M3 4,8xL | 0,50 | 1,16 | 1,16 | 2,03 | 2,54 | ― | ― | ― | ― |
| 0,55 | 1,16 | 1,16 | 2,03 | 2,54 | ― | ― | ― | ― | |
| 0,63 | 1,16 | 1,16 | 2,03 | 3,10 | ― | ― | ― | ― | |
| 0,75 | 1,16 | 1,16 | 2,03 | 3,10 | ― | ― | ― | ― | |
| 0,88 | 1,16 | 1,16 | 2,03 | 3,10 | ― | ― | ― | ― | |
| 1,00 | 1,16 | 1,16 | 2,03 | 3,10 | ― | ― | ― | ― | |
| 1,13 | 1,16 | 1,16 | 2,03 | ― | ― | ― | ― | ― | |
| 1,25 | 1,16 | 1,16 | 2,03 | ― | ― | ― | ― | ― | |
| 1,50 | 1,16 | 1,16 | 2,03 | ― | ― | ― | ― | ― | |
| 1,75 | 1,16 | 1,16 | ― | ― | ― | ― | ― | ― | |
| 2,00 | 1,16 | ― | ― | ― | ― | ― | ― | ― | |
| * In order to determine the design resistance characteristic value should be divided by a safety factor of 1.33 | |||||||||
| 1) steel grade S280GD, S320GD or S350GD according to PN-EN 10346:2011 | |||||||||
European Technical Assessment:
Declaration of Performance:
Product Card:
Operator Manual:
Do not forget about accessories!!!
Want to know more? Download our Catalog
bf_Baltic_Fasteners